Gate Valve in Bulgaria

Manufacturer of Best quality Gate Valve in Bulgaria

<p align="justify">Gate valves are primarily designed to start or stop flow, and when a straight-line flow of fluid and minimum flow restriction are needed. In service, these valves generally are either fully open or fully closed.The disk of a Gate valve is completely removed when the valve is fully open; the disk is fully drawn up into the valve Bonnet. This leaves an opening for flow through the valve at the same inside diameter as the pipe system in which the valve is installed. A Gate valve can be used for a wide range of liquids and provides a tight seal when closed.We are an <a href="/certificate"><strong>ISO 9001:2008</strong></a>,<a href="/certificate"><strong>ISO 9001-2008</strong></a>, <a href="/certificate"><strong>ISO 14001-2004</strong></a>, <a href="/certificate"><strong>OHSAS 18001-2007</strong></a>, <a href="/certificate"><strong>NSIC-CRISIL</strong></a>, <a href="/certificate"><strong>EEPC</strong></a>, and <a href="/certificate"><strong>QA-UKAS (ISO 9001-2008)</strong></a>, <a href="/certificate"><strong>SSI </strong><strong>Certified company</strong></a> that follows total Quality Management System. and have been recognized as one of the world’s leading stockists and manufacturer of quality metals for over two decades and are committed to quick responses, unsurpassed quality, competitive pricing, reliable deliveries and an exhaustive inventory.</p> , Manufacturer of high quality Gate Valve in Bulgaria, Manufacturer of best quality Gate Valve in Bulgaria, Price of Gate Valve in Bulgaria

Best Quality Gate Valve
  • Product: Gate Valve
  • Brand: Metalloy Pipe Fitting Inc.
  • Sizes: Refer the specification
  • Condition: New
  • Rating: 4.5, based on 71 reviews
  • price: Start from 60 USD (In Stock)

Get best quality Gate Valve in Bulgaria. We supply Gate Valve with variety of products worldwide. If you want to get price of Gate Valve in your area and want to get delivered at your doorstep. Please send us an query. We will get back to you soon.

Type Gate Valve
Standred DIN 3352 F5
Material Industrial-grade steel, carbon steel, stainless steel, alloy steel and special steel
Size DN40-DN400
Diameter 1”to13”
Order Accept custom order

 

Construction of a Gate valve

Gate valves consists of three main parts: body, bonnet, and trim. The body is generally connected to other equipment by means of flanged, screwed or welded connections. The bonnet, which containing the moving parts, is attached to the body, usually with bolts, to permit maintenance. The valve trim consists of the stem, the gate, the disc or wedge and the seat rings.

 

Advantages and disadvantages of Gate valves

Advantages:

• Good shutoff features
• Gate valves are bidirectional and therefore they can be used in two directions
• Pressure loss through the valve is minimal

 

Disadvantages:

• They can not be quickly opened or closed
• Gate valves are not suitable for regulate or throttle flow
• They are sensitive to vibration in the open state

 

Gate Valve Components

There are three main parts of a gate valve: body, bonnet, and trim.

 

Body

The body of a gate valve holds all of the operational parts of the valve. It is connected to the system with one of the mounting options below. The mounting option should be selected based on the current system mounting features and the type and size of the media.


Threaded The valve has internal or external threads for inlet or outlet connection(s).
Compression fitting A sealed pipe connection without soldering or threading. As the nut on one fitting is tightened, it compresses a washer around the second pipe, forming a watertight closure.
Bolt Flange The valve has a bolt flange(s) for inlet or outlet connection.
Clamp Flange The valve has a clamp flange(s) for inlet or outlet connection.
Union The valve has a union connection for inlet or outlet connection(s).
Tube fitting The valve has a connection for directly joining tubing at the inlet and/or outlet connections.
Butt weld The valve has a butt weld sized connection for inlet or outlet connection.
Socket weld/solder The valve has a socket weld connection for inlet or outlet connection.
Metal face seal The valve has a metal gasket sandwiched between two fitting parts. The gasket forms a face seal on each side of the fitting.

The valve has a metal gasket sandwiched between two fitting parts. The gasket forms a face seal on each side of the fitting.

 

Bonnet

The bonnet of a gate valve contains the moving parts and is attached to the valve body. The bonnet can be removed from the body in order to allow for maintenance and replacing parts.

 

Trim

The trim of a gate valve contains the functioning pieces of the valve: the stem, the gate, the disc or wedge, and the seat rings. Stem- The stem of a gate valve is either a rising stem or a non rising stem. The stem is responsible for the proper positioning of the disk. Non rising stems will almost always have a pointer-type indicator mounted onto the upper end of the stem to indicate valve position. This configuration protects the threads from carrying dirt into the packing because the stem threads are held within the boundary of the valve packing. Rising stems rise out of the flow path when the valve is opened. They can either have a stem that rises through the hand wheel or have a stem that is threaded to the bonnet.

Seat- The seat of a gate valve is either integral with the valve body or in a seat ring type of configuration. The seat ring construction is either threaded on to the body or pressed into position and the seal welded to the valve body. Pressed and welded is recommended for higher temperature applications. Press-in or threaded-in seats permit variation in the seat material verses the material of the body of the valve.

It is important to consider the size of the valve and system when selecting a gate valve. Gate valves are linear motion valves and therefore are taller than other manual valves. This is especially true if the valve uses a rising stem. Most of the time gate valves should be installed horizontally (perpendicular to the ground) with the manual actuator in the top position. This allows for easy access for maintenance and replacing parts. Smaller gate valves can be installed in vertical lines, but gravity tends to pull the valve out of alignment.


 

Packaging Of Gate Valve

1.Hessian / PVC Cloth Bundles with PVC Box Strap or Hexagonal Bundles
2.Wooden Crate
3.Wooden Box made of treated wood or Plywood sheet
4.Bundles (hexagonal)
5.Crates (steel/wooden)
6.Special Crates

 

Application Of Gate Valve

1.Food Industries
2.Water Industries
3.Oil & Gas Industries
4.Automotive Industries
5.Ship Building Industries
6.Petro-Chemical Industries
7.Engineering Cement Industries
8.Transport Industries-Rail and Road
9.Chemical & Pharmaceutical Industries
10.Construction Industries / Building Systems

Do you export Gate Valve in Bulgaria?

Yes, We export Gate Valve in Bulgaria.

How can I import Gate Valve in , ?

Please send us an query regarding your requirement of Gate Valve. Also the delivery location in , . We will get back to you soon.

Can I order Gate Valve for my overseas plant?

On what basis the price will be calculated of Gate Valve?

Depending on your quantity and quality as well as type the price will be calculated for Gate Valve. We exports only the best quality material. So you don't need to worry about our quality of Gate Valve.

  • Arthur October 19, 2018, 8:17 am
  • Dean October 11, 2018, 3:56 pm
  • Henri September 25, 2018, 10:11 pm
  • Rajat September 5, 2018, 5:15 pm
  • Debby August 9, 2018, 2:36 pm
  • Rafael July 25, 2018, 10:38 am
  • Kazuko July 25, 2018, 12:03 am
  • Youko May 26, 2018, 8:29 am
    thank you
  • Frances April 5, 2018, 1:52 pm
  • Gabielle March 12, 2018, 4:34 am
  • Anonymous User March 1, 2018, 3:49 am
  • Vince January 29, 2018, 11:53 pm
  • Pablo January 10, 2018, 8:46 pm
  • Joyce November 6, 2017, 8:53 am
  • Paloma August 9, 2017, 4:46 am
  • Valerie July 15, 2017, 4:13 pm
  • Leslie May 14, 2017, 11:19 pm
  • Anonymous User April 25, 2017, 12:52 pm
  • Stan March 26, 2017, 3:04 am
  • Kaori February 20, 2017, 1:37 am
  • Wilfred December 20, 2016, 11:37 am
  • Kirk December 12, 2016, 4:01 pm
  • Humberto October 26, 2016, 8:14 pm
  • Wilfred September 28, 2016, 1:37 pm
  • Tomas September 7, 2016, 8:16 am
  • Rita July 8, 2016, 7:49 pm
  • Isabel June 12, 2016, 9:41 pm
  • Wanda May 8, 2016, 9:59 pm
  • Tammy January 31, 2016, 10:31 am
  • Danielle January 25, 2016, 9:23 pm
  • Ophelia January 22, 2016, 4:56 pm
  • Vince January 7, 2016, 3:22 pm
  • Vicky December 20, 2015, 8:40 am
  • Nate November 26, 2015, 12:35 am
  • Tanya November 21, 2015, 2:30 am
  • Leonal November 1, 2015, 12:56 am
    Excellent service
  • Miyuki October 6, 2015, 2:16 pm
    Nice products and service
  • Anonymous User September 24, 2015, 9:00 am
  • Anonymous User July 6, 2015, 11:32 am
  • Karl July 6, 2015, 6:08 am
  • Irene April 28, 2015, 1:38 pm
  • Dennis April 18, 2015, 12:44 pm
  • Charley February 21, 2015, 5:53 pm
  • Jeanne January 20, 2015, 2:00 pm
  • Teddy January 13, 2015, 1:06 pm
  • Valerie November 19, 2014, 2:26 pm
  • Patty October 5, 2014, 2:34 pm
  • Fay August 19, 2014, 6:46 am
  • Juan August 15, 2014, 12:39 am
  • Anonymous User July 15, 2014, 1:49 pm
    The best deals for our Gate Valve
  • Anonymous User June 27, 2014, 7:11 pm
  • Kumiko May 15, 2014, 7:12 am
  • Michiyo May 10, 2014, 2:09 pm
  • Cindy May 4, 2014, 3:43 am
  • Rafael March 30, 2014, 5:24 pm
    Excellent service
  • Anonymous User March 12, 2014, 11:34 pm
  • Anonymous User March 12, 2014, 2:28 am
  • Kazuko January 17, 2014, 1:08 pm
  • Omar December 18, 2013, 3:43 am
  • Felix August 1, 2013, 1:22 pm
  • Stan July 20, 2013, 8:21 am
    Got delivered excelent quality Gate Valve
  • Itoe July 15, 2013, 11:00 am
  • Sam July 6, 2013, 10:50 am
    best in the pipe industry
  • Anonymous User June 23, 2013, 10:54 pm
  • Sandy June 10, 2013, 6:12 am
  • Fay May 31, 2013, 1:46 am
  • Rahul May 18, 2013, 3:54 pm
  • Gaston May 15, 2013, 10:46 pm
  • Rose April 21, 2013, 9:57 am
  • Allison February 24, 2013, 12:38 pm
  • Teddy February 11, 2013, 11:10 am

Give us your ratings